YamahaSynth.com Forums

This is the place to talk about all things related to Yamaha Synthesizers!
  1. Tracy
  2. MODX
  3. Thursday, 19 March 2020
MODX8- Using the A/D Input to record mono microphone audio track in Cubase Pro 10.5 works fine but the volume on playback from Cubase is so low it can't be used.
Settings: A/D Input button is on, gain to full, mixer fader in Cubase for audio track is 100%. Although it is recommended not to use phantom power, I've tried it with and without... with is a little louder but not enough. How can I achieve more volume?

In trying to remedy this I purchases a UR22C. When I plug it in and record the audio track into cubase, the volume is great, however I then the MODX midi sounds can't be heard even though the modx and ur22c are connected via midi in/out cables. When selecting track in/out, only the ur22c is available and not the modx.

I contacted Steinberg support and they said it was a driver issue, they deleted the most recent MODX driver I had installed and installed the latest UR22C "tools for modx" driver, which did not help the issue.

Settings:
Microphone Using MODX A/D Input with Phantom Power
Steinberg UR22C turned off.
Modx A/D Input Mic : Left (Mono)
Quick Setup: Audio Rec On DAW
Change Audio I/O: MIC
A/D Input Button: On
A/D Gain: Full Volume
Mic Phantom Supply Used
Cubase:
Mono Audio Track
REC enabled
Monitor Button: On
Track In: Monobus (USB Mail L)
Track Out: Stereo Out


1. How can I have higher volume through A/D Input microphone with modx?
2. OR How can I use the ur22c and be able to hear the ur22c microphone audio track, cubase vst's and modx midi channels at the same time?
Responses (2)
Bad Mister
Yamaha
Accepted Answer Pending Moderation
MODX8- Using the A/D Input to record mono microphone audio track in Cubase Pro 10.5 works fine but the volume on playback from Cubase is so low it can't be used.
Settings: A/D Input button is on, gain to full, mixer fader in Cubase for audio track is 100%. Although it is recommended not to use phantom power, I've tried it with and without... with is a little louder but not enough. How can I achieve more volume?
Welcome to YamahaSynth!
Thanks for the question.

Sorry, after reading your post several times, it is not clear what you are doing.
You mention the UR22c but later say it is turned Off (?)
You connect the microphone to the A/D Input of the MODX but later say you tried it with and without Phantom Power?
How is that possible as the MODX does not provide phantom power.

Can you describe what type of microphone you are using?
Which device MODX or the UR22c is connected to your sound system? (this is the device acting as principal audio interface).
A MIDI connection between the MODX and anything has nothing to do with sound... MIDI data cannot be heard. MIDI data recorded to Cubase must be played back to the MODX, the MODX audio output must be routed to your speakers.

Audio arrives at your speakers through the device acting as your audio interface. — all signals that are to be monitored (heard) must be connected to the audio interface.
  1. more than a month ago
  2. MODX
  3. # 1
Accepted Answer Pending Moderation
I think generally, an in-line phantom power supply is used. Something like:

https://images.reverb.com/image/upload/s--ee6lacUU--/c_crop%2Ch_0.750%2Cw_1.000%2Cx_0.000%2Cy_0.102/f_auto%2Ct_large/v1563568380/jrlxhrz8xokt6b6pv9la.jpg

But hearing that phantom shouldn't be used with MODX - tried without the inline power supply.

Tracy, the deal is that you cannot inject phantom power directly into your MODX's ports. It's not made for that. But a sensible phantom power injector such as the Mackie M48 supplies 48V (phantom power) on it's "input" XLR port and supplies a line-level balanced signal on the "output" XLR port. So use of a phantom power injector that supplies power on only one of the two ports (the microphone-facing connector) is perfectly fine. Just verify - like can be done with the Mackie M48 manual - that the MODX-side connection is line level.

If your mic needs phantom power - you're going to need to use a phantom power supply of some sort to give it power since MODX doesn't supply phantom power (nor can it receive it).

I'm not attempting to unravel all of this - but that's my understanding of your phantom power and microphone connection.
  1. more than a month ago
  2. MODX
  3. # 2
  • Page :
  • 1


There are no replies made for this post yet.
Be one of the first to reply to this post!
2018 © Yamaha Corporation of America and Yamaha Corporation. All rights reserved.