YamahaSynth.com Forums

This is the place to talk about all things related to Yamaha Synthesizers!
  1. daniele
  2. MOXF Series Music Production Synthesizers
  3. Wednesday, 12 January 2022
I'm using A/D inputs of MOXF6, and i've routed the signal through rotary efx - insertion effect A, is it possible toggle between fast and slow speed using M WHell?
I've Tried to connect A/D insertion efx to control but nothing has been happend
Is there a way to change A/D parameter insertion effect using Syex?
Thanks
Responses (7)
Accepted Answer Pending Moderation
In Performance mode (MASTER ALSO)
F0 43 10 7F 1C 00 30 03 22 00 00 F7 selects “slow”
F0 43 10 7F 1C 00 30 03 22 00 01 F7 selects “fast”

In Song or Pattern modes, for Insert Effect A “Rotary Speaker"…
F0 43 10 7F 1C 00 36 03 22 00 00 F7 selects “slow”
F0 43 10 7F 1C 00 36 03 22 00 01 F7 selects “fast”

Now it works

Hi thanks
Accepted Answer Pending Moderation
I use Cubase and i set ins sw to on for A/D.
I set up a message like this
F0 43 10 7F 1C 00 0A 00 01 04 F7
to switch in master mode and it works even if i'm not in song pattern Mixing mode
thanks a lot
Bad Mister
Yamaha
Accepted Answer Pending Moderation
Sorry, I haven’t been able to physically check this but it assumes you are in Song/Pattern Mixing mode, that you have the INS SW (Insertion Switch) is set to On for the AD IN, in the MIXING program. It also assumes your DAW is set to send Sysex.

What DAW are you using? Example, Cubase does not record or send Sysex through unless you defeat the MIDI Filter.
I’ll see if I can double check this for you…
Accepted Answer Pending Moderation
I'm very sorry, i thank you but nothing happend, neither using keybord nor using DAW:(
maybe i cannot use settings of moxf6 but it seems the synth doesn't recognize sysex message
excuse me
Bad Mister
Yamaha
Accepted Answer Pending Moderation
Page 134 of the Data List booklet

F0 43 10 7F 1C 01 36 03 22 00 00 F7 = “slow” for Insertion A
F0 43 10 7F 1C 01 36 03 22 00 01 F7 = “fast” for Insertion A

F0 43 10 7F 1C 01 36 04 22 00 00 F7 = “slow” for Insertion B
F0 43 10 7F 1C 01 36 04 22 00 01 F7 = “fast” for Insertion B

Let us know…
Accepted Answer Pending Moderation
Thanks is there another way to change parameter? Eg. Via sysex?
Thanks a lot
Bad Mister
Yamaha
Accepted Answer Pending Moderation
I'm using A/D inputs of MOXF6, and i've routed the signal through rotary efx - insertion effect A, is it possible toggle between fast and slow speed using M WHell?
I've Tried to connect A/D insertion efx to control but nothing has been happend
Is there a way to change A/D parameter insertion effect using Syex?
Thanks
No, the MW cannot be applied to control the A/D Input Part nor its effects.
  • Page :
  • 1


There are no replies made for this post yet.
Be one of the first to reply to this post!
2021 © Yamaha Corporation of America and Yamaha Corporation. All rights reserved.