Synth Forum

Notifications
Clear all

DX Reface 1.30 Updater not working.

6 Posts
2 Users
0 Likes
1,734 Views
 Arn
Posts: 0
Active Member
Topic starter
 

Hello,

I tried to apply the DX Reface 1:30 update.

I plugged the DX Reface into a USB port on a computer running Windows 7 32-bit.

I ran the updater downloaded from Yamaha's web page.

It took about 3 1/2 minutes to get to 100%.

I left it alone for another ten minutes.

The DX Reface is still at version 1.20, as determined by holding down the three keys and restarting it.

Any idea what's wrong, or what I should try next?

Thanks.

:Arn

 
Posted : 22/02/2017 3:07 pm
Bad Mister
Posts: 0
 

You saw the "Loading", "Erasing", "Writing" and "Completed" screens or no?

 
Posted : 22/02/2017 4:01 pm
 Arn
Posts: 0
Active Member
Topic starter
 

Thanks.

I believe I just saw Loading - that's where the bar graph moved across to 100%.

(I didn't know there were "Writing" and "Completed" screens.)

;Arn

 
Posted : 23/02/2017 12:24 am
Bad Mister
Posts: 0
 

Recommended: wait for that "Completed" screen! πŸ™‚

From the download page:
β– Applicable models
reface CS and reface DX, ealier than version 1.30

β– Notes
β€’ This updater is designed for use with the reface CS and reface DX only.
β€’ This updater is to be used at the user’s own risk.
β€’ A computer running one of the following operating systems is required for this update:
Microsoft Windows 7 (32-bit or 64-bit); Windows 8.1 (32-bit or 64-bit);
Windows 10 (32-bit or 64-bit)
β€’ The update will take approximately five minutes. Please ensure that your computer does not enter Sleep mode during this
time.
β€’ During the update, do not launch or operate any applications other than the updater on your computer.
β€’ During the update, be sure to power the reface by using its AC power adaptor.
β€’ If your reface should fail to function as a result of the supply of power being interrupted or incorrect operation during the
update, repeating the update procedure from the beginning may not resolve the problem.
β€’ If your reface fails to function after repeating the update procedure from the beginning, please contact your nearest
Yamaha service center.

 
Posted : 24/02/2017 3:59 pm
 Arn
Posts: 0
Active Member
Topic starter
 

Thanks - I'm extremely familiar with the instructions that accompany the updater; I've read them innumerable times trying to find out what I might have done wrong.

Attached is the window of the updater. (Ignore the diagonal line.)

This is as far as it gets; I have left it like this for up to half an hour, with no further change.

I've tried it on three computers, under windows 7 and 10.

Something clearly isn't right.

Can you offer me some further direction?

Thanks.

:Arn

Attached files

 
Posted : 27/02/2017 2:59 am
 Arn
Posts: 0
Active Member
Topic starter
 

Wait; never mind.

On the 10th try, it worked. I don't know why.

Thanks for all your help. It's done.

:Arn

 
Posted : 27/02/2017 3:51 am
Share:

Β© 2024 Yamaha Corporation of America and Yamaha Corporation. All rights reserved. Β Β  Terms of UseΒ |Β Privacy PolicyΒ |Β Contact Us