Notifications
Clear all
MOXF Series Music Production Synthesizers
6
Posts
2
Users
0
Likes
2,756
Views
Topic starter
I hope I can get some help. So I'm trying to connect my MOXF8 to Logic Pro. Now I've read all the forums and videos on youtube, tried all the steps suggested, but I can't seem to get he sounds from MOXF8 go out on LPX. The sound from LPX can be played on the MOXF8 but not the other way around. I've installed the driver, editor, etc that was suggested but still I don't get any sound. I have a Saffire Pro 40 as my audio interface. My Mac is connected to the Pro40 and my MOXF8 is connected to my Mac via USB. I'm at the point now where I'm about to call someone to come over and just do it! I have attached pictures on the setup I've done on both MOXF8 and LPX (I'm sure some of the pics are irrelevant). Any help will be deeply appreciated.
Posted : 20/02/2017 2:20 am
Is the Main L&R Output of the MOXF connected to your Audio Interface? In order to hear the MOXF the audio outputs must be connected to the device you are using as your audio interface and in turn, the audio interface must be connected to the speakers.
If you are using something other than the MOXF as your audio interface, set the MOXF to 2CH mode because you will only be using the Main L&R... the MOXF is 4CH through its own USB audio interface, only.
Posted : 20/02/2017 1:36 pm
Topic starter
My MOXF is connected to my Mac via USB, which my Mac is connected to my interface. I can hear the sounds from LPX library and can play those sounds on my MOXF but I cannot hear the library sounds from my MOXF in LPX. I changed it to the 2CH mode but still nothing. In my original post, I added some pictures and wanted to know if the setup looks right. Again, my MOXF is connected to my MAC laptop via USB and my MAC is connected to an audio interface (Pro 40).
Posted : 20/02/2017 6:09 pm
Is the Main L&R Output of the MOXF connected to your Audio Interface? In order to hear the MOXF the audio outputs must be connected to the device you are using as your audio interface and in turn, the audio interface must be connected to the speakers... in addition to bring connected to the speakers.
Posted : 20/02/2017 9:02 pm
Topic starter
So I was able to get the sound come out of LPX. Now the issue I am having is the tracks created for the MOX are all changing (can't have different track sounds). How do I go about recording different tracks?
Posted : 28/02/2017 1:18 am
Sorry, I don't understand the question.
Posted : 06/03/2017 9:10 pm
