Mastering MONTAGE: Pattern Workflow and Recording Features In OS V3.5


Want to check out all the features added to Yamaha MONTAGE OS v3.5? Check out the overview article here. The Performance Pattern Sequencer introduced in OS v3.0 added loop style MIDI recording to MONTAGE. OS v3.5 adds some great new features and refinements that you will love. Check it out! Adding Parts During Record A […]

Want to check out all the features added to Yamaha MONTAGE OS v3.5? Check out the overview article here.

The Performance Pattern Sequencer introduced in OS v3.0 added loop style MIDI recording to MONTAGE. OS v3.5 adds some great new features and refinements that you will love. Check it out!

Adding Parts During Record

A great new feature is the ability to add parts during Pattern Section Record. Here’s how I created the quick example you can check out below:

1. Choose the single Part drum kit “Trap Kit”, press [RECORD] and select Pattern Record.
2. The default tempo is 135 bpm. You can change that by tapping on “Tempo” and entering what you want. For this example, I changed the tempo to 80.
3. In the screen shot below I set “Rec Quantize” to 16th note (120, which at 480 pulses per quarter note (ppq) equals a 16th note in case you were wondering). This automatically quantizes anything I record to the nearest 16th note. Here is the starting point:

Pattern001
4. Press Record and record a drum loop. Once that’s done and while still in record mode press the [RECORD] button to enter Record Rehearse (The [RECORD] button blinks in Record Rehearse). The blinking [RECORD] button indicates that you are still in record mode, but you are not recording—you are rehearsing. It’s a cool feature!
5. Touch on Part 2 (the cross in the square above) and you’ll drop into Category Search. Select “Attribute” and choose “Single”:

Pattern002

6. Choose “Bass” as the main Category and “Synth” as the Subcategory, choose “FM Lately Bass” and press [ENTER] to return to the Pattern screen.

Pattern003
7. You can rehearse the bass line and when you’re ready to record press the [RECORD] button (it will stop blinking to indicate that you are recording!).
8. After you’ve recorded the bass on Part 2 press the [RECORD] button to drop into record rehearse (blinking!) and add another Part by touching on Part 3. I chose “Rd Soft Touch Wah”:

Pattern004

9. Press [RECORD] to drop back into record (not blinking!) and record Part 3. After you’ve recorded Part 3 press the [RECORD] button to drop back into record rehearse and add part 4. I chose “DualCoilSlide Vel”:

Pattern005
10. Repeat the process again: Press [RECORD] when you are ready to record, record Part 4 and press [STOP]. Here is a 4 Part, 4 Measure Groove:

Pattern006

11. Finally, I added a synth lead in Part 5, changed the Pattern Scene Length to 32 measures and recorded a synth solo that starts on measure 8. Among the cool features about a Pattern Scene is you can create tracks with different lengths. The first 4 tracks will continue to loop for 4 measures, but the synth solo will play for 32 as long as the length is set to 32:

Pattern007

You can start with a Single Part Drum Kit, press [RECORD] and build a Pattern track by track without ever dropping out of Pattern Record. This is a great improvement to the Pattern Sequencer.

Overdubbing Controllers

With OS v3.5 you can now use real-time overdubbing to record your Controller actions while deleting previous Controller events in a Pattern Section. A perfect example is Overdubbing Super Knob Control. Say you recorded a Pattern Section with Super Knob movement that you decide later could be done differently. Simply press [RECORD], select “Overdub” and re-record your Super Knob movement. This works with all the physical controllers like Cutoff Frequency, Modulation, Ribbon Control, etc.

Erase Event

There may be instances where you want to erase a certain controller from a track but not the entire track. For example, if you recorded a track with a lot of aftertouch that you want to get rid of, but you like the track itself, you can use this job to delete only aftertouch and nothing else. This feature is now available on in OS v3.5 under [Edit/Job]>[Song/Event]>[Erase Event]:

Pattern008
Get Phrase All

The “Get Phase” job is a great way to grab tracks from MIDI Song and place them in a track of the Pattern Sequencer. Under OS 3.0 you could only select single tracks, so if you wanted to copy an entire arrangement to a Section of a Pattern you had to copy each track one at a time. This becomes cumbersome when you have multiple tracks you want to get. Under OS v3.5 you can get of all the tracks in a certain range and copy them to the Pattern Sequencer.

Normalize Play FX Per Scene

This feature is great when you want to try out different grooves over the same set of tracks. Here’s how you can accomplish this.

In this example I used the Scene 1 from the Pattern I recorded above and copied to Scenes 2, 3 and 4. To do this Touch [Edit/Job]>[Track]>[Copy] and Select “Track = All”, Scene 1 in the top row and “Scene 2” as the destination in the bottom row:

Pattern009
Scene 1 was auto quantized to the nearest 16th note for a tight straight time feel. For Section 2 I touched “Play FX” set the Swing Rate for each Track to +17 for a 16th note swing feel. To lock in that feel, I normalized the Play Effect for Scene 2 only. The other Scenes are untouched:

Pattern010

Now I have the straight time feel in Scene 1 and the swing feel version in Scene 2. For Scenes 3 & 4 I repeated the process by adjusting the feel with the Play FX then Normalizing each Scene. This is a cool way to try out different grooves during the Pattern recording process.

Pattern Chain Switch

A Pattern Chain allows linear playback of Scenes in a predetermined order. In the OS v3.0 the only way to engage a Pattern Chain was from the same place you created the chain (Under Pattern Edit/Job/Chain). Now you can engage a Pattern Chain from the main Pattern Play screen:

Pattern011This new feature enhances the usability of the Pattern Chain by integrating control in the main Pattern Screen.

Undo/Redo on Each Screen

In the previous OS version, you could only find Undo/Redo of the last executed job on the the first page of the Pattern Edit/Job screen. Now Undo/Redo can be found on almost every screen in the Pattern Sequencer. This simple addition greatly enhances workflow:

Pattern012

The new Pattern Recording and Workflow features added to MONTAGE OS v3.5 are welcome additions to the Performance Pattern recorder. Update your MONTAGE to OS v3.5 today to enjoy these new enhancements!

Have questions/comments? Join the conversation on the Forum here.

Keep Reading


© 2024 Yamaha Corporation of America and Yamaha Corporation. All rights reserved.    Terms of Use | Privacy Policy | Contact Us