Kier Darby made a video specifically highlighting the MIDI changes in the M models. Zone Master, Arp Midi Out have been eliminated as has the abi...

You need to find the programming that is causing the problem. I'm about to erase everything and reinstall the Firmware.... Reinstalling the fi...

Parts 9-16 will sound for two use cases: 1) the user selects a part in the 9-16 range and plays the keyboard or 2) the part 9-16 receives MIDI from an...

A part can only be either Internal or External but not both. There may be a different way that doesn't "burn" a Part. I'm just not sure what ends...

Welcome to the forums! A small amount of side-to-side play is typical for the keybed in the modx7. But excessive wobbling that has developed since...

There are 60 new performances in the OS 3.0 release for Modx M. *1 The new Performances added by firmware version 3.00 update. These are perfo...

By default those Reface instruments will be set to Omni Mode and listen to ALL midi channels. If you assign them to different channels that should ...

The 'trick' is to find the programming that is causing the problem. Almost everything the synth does is because it was programmed to do it. Knobs, s...

Welcome to the forums! Can you tell us what you mean by 'cant get part 9-16 to sound with other parts'? On the montage m and modx m models only pa...

Nice job demoing how the Modx M has some 'gotchas' with the Quick Edit settings in that they not only don't provide ALL of the params for a function (...

Welcome to the forums! Yes - what you want can be done. I thought I could simply set the Performance Parts on the MODX to that channel, assign ...

Thanks for the additional info. Possibly there is a loose cable connection inside the case. There could also be a problem solder joint on one of the c...

What preset piano patch were you playing? How were you playing it? Lots of chords and notes at the same time? Can you describe what you were doing...

The only thing we can suggest is to check each of the connections to the instrument including power and any pedals, controllers or external device con...

Perhaps your VSTi or IK have dropped your MIDI port configuration? Question #1 - did the 'fix' you describe get it working without connecting to the...