Mastering MODX: Arp Record on DAW


In the previous installment we covered the basic setup for recording MIDI Tracks in a Cycle (loop) to Cubase using the QUICK SETUP = “MIDI REC on DAW”. This time we’ll pick up with overdubbing a Part that is controlled by an Arpeggio… Using the QUICK SETUP =”ARP REC on DAW”. This setup template places […]

In the previous installment we covered the basic setup for recording MIDI Tracks in a Cycle (loop) to Cubase using the QUICK SETUP = “MIDI REC on DAW”. This time we’ll pick up with overdubbing a Part that is controlled by an Arpeggio… Using the QUICK SETUP =”ARP REC on DAW”.

This setup template places the Arpeggiator block prior to the USB-MIDI output, so those PARTs set to utilize an Arpeggiator will output the MIDI data of the Arpeggio as opposed to the Notes you use to trigger them directly. One of the important things to realize when you are triggering an arpeggio phrase, the notes you use to trigger them are usually not what you want to record to your MIDI Track, you want the phrase data (the note data) of the Arpeggio.

Quick Setup

Selecting this template will automatically set the MIDI OUT of the active arpeggiators so that its data is sent to the DAW while the ‘trigger notes’ are blocked.
Press [UTILITY]
Touch “Settings” > “Quick Setup”
Touch Quick Setup 2: “ARP REC on DAW”:

1 Arp on DAW
In the previous article we setup to record Drums, Bass and Clavi, using the “MIDI REC on DAW” template – which allows us to record our keyboard playing directly as normal MIDI data. Now let’s setup the “Mega 60s Clean” Guitar in Part 4 to use an appropriate arpeggio phrase.

When you select an Arpeggiator for a PART, it will automatically reference the tempo as currently set for the PERFORMANCE or for the Montage as a whole (if you are using external clock).

Here is our setup thus far:

  • Part 1 – Drums (recorded as MIDI)
  • Part 2 – Bass (recorded as MIDI)
  • Part 3 – Clavi (recorded as MIDI)
  • Part 4 – Guitar w/Arp – which we will setup and record as MIDI.

From the HOME screen:

  • Press [EDIT].
  • Select Part 4 by either using the blue Part item in the lower left corner of the screen or by using the [PART SELECT-MUTE/SOLO] method.
  • “Part 4” and “Common” appear (blue) in the lower left corner of the screen.
  • Touch “Arpeggio” > “Individual”.
  • Touch the box under “Name” in the first slot to engage the pop-in ARP “CATEGORY SEARCH” function… we are looking for the following ARP Phrase:

2 Arp Cat Search
You can type in “jazzfunk” into the portion of the screen with the magnifying glass to initiate a text search…
We want to assign Arpeggio “[Mg]MB_JazzFunk1_C” to slot 1. Do this and Press [ENTER]:
3 ArpComm
In the screenshot above you can see a column with the 8 ARP SELECT locations… (only 5 are currently filled)…

As is true throughout MODX – the important functions that you need to access are repeated on the related screens to give you convenient access. The ARP PART SWITCH, “Arp Part”, and the MASTER ARP SWITCH, “Arp Master”, both appear here at the top of the screen. Both need to be activated.

The MASTER ARP SWITCH must be ON for any of the ARPEGGIATORS to work and obviously each individual PART has its own switch which must also be activated. Remember, an ARP does not start simply by turning the ARP SWITCH ON. You must also meet the requirements setup for that ARP to play. To see these requirements:

Touch “Common” in the second column to see the “Limit” requirement and settings that define the arpeggio:

4 ArpComm2

Arpeggio Common

On the PART > “Argeggio” > “Common” screen you can see how this arpeggio has been set to respond.

“SYNC QUANTIZE” – Sets a value for the accuracy of feeding chord intelligent information to the ARPEGGIATOR. If set to a value like 240 clock pulses (an eighth note, to you and me) then you need only be within an eighth note of the downbeat to correctly have the arpeggio change at the top of the next measure. With computer-based/chip-based, artificial intelligence, you can be ANY THING BUT LATE. It is better to feed the information to the technology prior to the downbeat. If you are late (musically, late) you will hear the error as the technology tries to accommodate you. If however, you feed the F7#9 chord within an eight note of when you wish to hear it, the 240 setting will make you sound great, immediately! It QUANTIZES only the start of the ARPEGGIO PHRASE – it does NOT, change the timing of the phrase itself, just the “START” of the phrase. This means if you are late by an eighth note, the phrase will remain clock shifted exactly 240 clock ticks behind the beat!

“HOLD” – determines how it responds to your key presses. “ON” means you do not have to hold the keys for it to continue. “OFF” means you do have to hold the keys for it to continue. “SYNC-OFF” means you release the keys the arp runs in the background without sounding, maintaining tempo and position within its phrasing – in a kind of “needle-drop/peekaboo” like phrasing. You can use this to create new variations by adding rests to the phrase by lifting your hand.

“KEY MODE” – has to do with how the arpeggiator deals with the phrase data. Currently, (Key Mode = “SORT”) your Key presses are being sorted by the specific Arp phrase. If set to “DIRECT”, your trigger notes are heard, instead.

“CHANGE TIMING”- Set to change at the top of the next measure. This forces the Arp phrase to always begin positioned properly within the measure count.

“Velocity”, “Gate Time”, “Arp/MS Grid”, “Quantize Strength”, “Unit Multiply”, and “Swing” are a part of the Arpeggio Play Effect and can alter the timing and feel of the arpeggio phrase. (More in a future article)

“VELOCITY LIMIT” / “NOTE LIMIT” – These define which KEYS on your keyboard will *control* the arpegggio phrase for this PART and at what play strength is required to control it. Phrases can be set to start by triggering specific keys at specific velocities.

“OCTAVE SHIFT” – will increase or decrease the octave that the phrase is set to play.

“OCTAVE RANGE” – will allow each successive phrase to transpose up and octave. First time through original Octave, next time through the Octave will be offset by the value set here.

In Cubase, if you have Dissolved Parts (separated the data to individual MIDI Track), or even if you elect to always record to separate tracks, you can setup to record the Guitar ARP to its own MIDI track. But it is totally possible to continue to use a single MIDI RECORD TRACK in Cubase (Channel = ANY) as MIDI does allow data to remain discreet by Channel alone.

If you create a separate MIDI Track set the Channel to “4” to match the Channel of the MONTAGE; PART 4 is set to transmit on MIDI Channel 4, you will want to turn the CYCLE RECORD function OFF.

When recording arpeggios, you want to record through once, start-to-end, to avoid doubling when it loops around. If you think that you are fast enough to stop it before it begins again, you are not!

Use the Cubase Click and Count-in, because your main job is to trigger that arpeggio chord on the downbeat so that the phrase sits in time with the track.
Record the rhythm guitar.

After recording ARPEGGIO data to an external DAW, you must ensure that on playback you are not triggering the ARPEGGIATORS. An understanding of the MIDI Signal Flow chart will help here. When you setup for “ARP REC on DAW” the routing places the Arpeggiators just after the keyboard and just prior to the MIDI OUT (shown below) so that it is able to filter out your control trigger notes and output just the arpeggio phrase data instead.
MIDI SIGNAL Flow: KEYBOARD > ARPEGGIATOR > MIDI OUT:

4 ArpComm2
When the data returns (echoes back) from the DAW, it arrives via USB “MIDI IN” and triggers the MODX “TONE GENERATOR”.

Whenever you are going to playback data, so as not to have the incoming MIDI data trigger the arpeggiator, it must be in the condition you see above. The MIDI IN does not travel through the arpeggiator. If ever you are playing back data and it is retriggering the ARPS it will sound and behave strangely.

Once you have completed recording Arps, you will want to make sure that the ARPEGGIATOR is out of the way of returning MIDI IN data.

In the screen above (Settings > MIDI I/O) toggle the ARP MIDI OUT parameter ON and OFF and notice the MIDI Signal Flow diagram. What this switch does is move the location of the ARPEGGIATOR. All signals travel left to right: 

ARP MIDI OUT = ON: KEYBOARD > ARPEGGIATOR > MIDI OUT > DAW (Cubase) > MIDI IN > TONE GENERATOR
ARP MIDI OUT = OFF: KEYBOARD > MIDI OUT > DAW (Cubase) > MIDI IN > ARPEGGIATOR > TONE GENERATOR

Extra Credit

You can bypass the Arpeggiator by pressing [SHIFT] + [ARP ON/OFF], the button will flash to indicate the Arpeggiators are bypassed.

MULTI PART RECORDING – with MULTIPLE ARPEGGIATORS

Any time you have multiple Parts and multiple arpeggiators, it works the same as recording one. Use the QUICK SETUP #2: ARP REC on DAW. This sets the ARP MIDI OUT parameter to ON, and allows those PARTS with ARPEGGIOS to be documented as MIDI data, yet those PARTs you are playing directly are recorded normally. Try a quick experiment using the “Kreuzberg Funk” Performance. This 8 PART Performance includes 7 Arp PARTS controlled in a left-hand split, and has a synth lead sound C#3 and above:

6 Kreuzberg
Checklist:

  • MODX is set to MIDI I/O mode = Multi – meaning you are set to transmit and receive on multiple MIDI channels simultaneously. [UTILITY] > “Settings” > “Advanced” > MIDI I/O mode = Multi.
  • Create a single MIDI track in Cubase with the MIDI OUT channel set to “ANY” – allowing each recorded channel to be echoed back OUT on the channel on which it arrives – “Dissolve Parts” later.
  • Set Cubase to transmit MIDI Clock Out to MODX Port 1. Go to TRANSPORT > PROJECT SYNCHRONIZATION SETUP > MIDI CLOCK OUT > DESTINATION > MODX Port 1.
  • Use the “ARP REC on DAW” Quick Setup template to record and to playback what you’ve recorded. This automatically sets the MIDI SYNC = MIDI and sets ARP MIDI OUT = ON.
  • Because the MIDI data recorded may contain SCENE change, and therefore ARP commands, ensure that ARP MIDI OUT = ON is selected when playing back your MIDI d.

IMPORTANT[SHIFT] + [ARP ON/OFF]

This is the shortcut to ARPEGGIO BYPASS. This function causes the main [ARP ON/OFF] button to flash, as it bypasses all ARPEGGIO Functions. This can be useful when you want to playback data from a DAW and not have that data trigger the internal ARPEGGIOS… chaos will always follow if you let MIDI data playback and trigger the Arpeggiator (again). You must defeat input to the arpeggiator during playback! ARPEGGIO BYPASS accomplishes this!

Join the conversation about this article on our Forum here.

And check out the next article – coming soon!

Keep Reading


© 2024 Yamaha Corporation of America and Yamaha Corporation. All rights reserved.    Terms of Use | Privacy Policy | Contact Us