Notifications
Clear all
Topic starter
I know I have asked this in the past, and I'm pretty sure it's an easy fix, but for the life of me I cannot remember how to do this.
CURRENT SITUATION -- Created a performance with split keyboard. Organ and piano
-- Organ has Leslie effect attached to the Mod Wheel
-- Problem: Leslie effect is on both Organ and Piano, and I only want it on Organ.
I know this is "basic" maneuver however I just can't remember how to turn it OFF on the piano
Appreciate the help!
Johnny Ack
Posted : 17/01/2023 7:40 pm
The rotating speaker should be placed as an insertion effect. Insertion effects can only be edited within a single Part and that single Part has its own (not share) two insertion effects. If your piano Part has a rotating speaker as an insertion effect - then change this insertion (InsA or InsB) effect to "through" to bypass it.
If you're using system effects (such as variation effects - reverb is the other system effect) then these could apply to multiple Parts. You would change Variation Send to 0 within the Part configuration for piano in order to stop the piano from participating in this effect bus.
If you're using master effects - then these effects would apply to everything no matter what and would not be the right effect type to use if you want a difference between various Parts.
Current Yamaha Synthesizers: Montage Classic 7, Motif XF6, S90XS, MO6, EX5R
Posted : 17/01/2023 8:04 pm
Topic starter
Great Thank you so very much. This solves the issue.
Posted : 17/01/2023 8:54 pm
This is how I would do it:
1. Select Piano part them press EDIT
2. Press Mod/Control then Receive SW.
3. In the centre of the top row of receive switches tap MW to turn Mod Wheel off. This stops the Mod Wheel from having any effect on the piano part.
Posted : 18/01/2023 9:34 am
