Synth Forum

Notifications
Clear all

Midi in and out

4 Posts
3 Users
0 Reactions
1,895 Views
Posts: 0
Active Member
Topic starter
 

As I turned zone master on, I am able to control my light console from a part of my performance. That’s what you explained in another post, and that’s good.
But, I can’t control anymore the whole performance with my keytar:/ only the part with the same midi channel plays!!!
Is it possible to assign a same midi channel IN for all the parts? As we can do for the transmit channel.
Or is there another way to do this, knowing that there are no keytar who can transmit omni midi or multichannel:/
My montage controls a light console and at the same time is controled by another midi keyboard. All this on stage for live performance.
Thanks

 
Posted : 18/04/2018 3:51 pm
Bad Mister
Posts: 12303
 

https://yamahasynth.com/forum/29525-midi-note-on-off

 
Posted : 18/04/2018 4:16 pm
Posts: 0
New Member
 

This is a MAJOR limitation with Montage, which fails to implement the expected MIDI specification for multi-timbral synths. Simply put: The Montage FORCES a single MIDI channel per part and thus, you CANNOT program splits for a standard external controller!
MANY POSTS and MANY USERS have loudly complained about this issue for literally years now.
We have to keep pushing for this issue to be resolved.
What we need is very straightforward: Allow the user to set the MIDI receive channel PER Part.

 
Posted : 18/04/2018 5:12 pm
Posts: 0
New Member
 

This is a MAJOR limitation with Montage, which fails to implement the expected MIDI specification for multi-timbral synths. Simply put: The Montage FORCES a single MIDI channel per part and thus, you CANNOT program splits for a standard external controller!
MANY POSTS and MANY USERS have loudly complained about this issue for literally years now.
We have to keep pushing for this issue to be resolved.
What we need is very straightforward: Allow the user to set the MIDI receive channel PER Part.

Actually, this statement needs to be amended: You cannot program splits OR EVEN LAYERS for a standard external controller.

 
Posted : 21/04/2018 2:47 pm
Share:

© 2024 Yamaha Corporation of America and Yamaha Corporation. All rights reserved.    Terms of Use | Privacy Policy | Contact Us