Notifications
Clear all
Topic starter
Montage Wavetables and Wave Sequences.
Using the AWM2 synthesis engine of Yamaha Montage synth, I managed to find methods that allow you to have sounds similar to those obtained in Synths and Virtuals equipped with Wavetable oscillators or capable of reading Wave Sequences.
For further information you can find on my site:
- An article that analyzes 4 different techniques in detail;
- An article that explains how to create Montage-compatible waveforms consisting of "single-cycle" waveforms.
- A free library containing 75 Waveforms with "single-cycle" waveforms, more than 30 Performances organized in 3 LiveSets each with a User Audition created according to these sounds.
A video with part of the auditions can be found at the link Trailer Video https://www.youtube.com/watch?v=9_JQovwagsA
BENIS.IT
Posted : 01/06/2020 5:36 pm
Very impressive library!
Posted : 01/06/2020 6:20 pm
Topic starter
Very impressive library!
Thanks!
it is a starting point for many new sounds that can be easily created with these techniques. In this regard, I hope Yamaha can include in the next firmware some small changes that make it easier to use these techniques.
- greater range of the non-synchronous elements delay (Elements-Key on Delay now only 0-127)
- possibility of loops and more steps (16 or 32) in synchronous elements delay (Elements Key on Delay tempo Sync)
- less jitter
- elements in phase even in the presence of an "elements delay"
- option to create a "multisampled waveform" if you load a single-cycle wave of 2048 samples
I entered the request in Ideascale
IDEA SCALE
Posted : 02/06/2020 10:07 pm
There's a certain hope that Key On Delay can be extended. See Data List page 221. Parameter 12 has only one byte, but bytes 14 to 16 are reserved, one of them can be used for Key on Delay to get 14 bit resolution. The other not yet used bytes can add other functionality...
Posted : 06/06/2020 4:17 pm
An interesting initiative.
I will gladly put my Blofeld in my MODX 😉
I voted Idea Scale
Posted : 07/06/2020 9:04 am
Topic starter
thanks Jarek 😀 . Danfor we hope that Yamaha decides to insert in the firmware what it would take to make the techniques seen, easier to use
Posted : 12/06/2020 10:19 pm
