Notifications
Clear all
Topic starter
Out of curiosity, I went to Utility - Contents - Data Utility and tapped on Waveform. I saw a little horizontal graph at the top of the screen that showed me how much of the available waveform memory was being used. But what I didn't see was a list of the waveforms. There was nothing but a blank area where I would have expected to see the list. Is this what I'm supposed to see?
The Bosendorfer Performances play just fine, so I know the waveforms are onboard. But I was surprised (alarmed?) not see a list of them.
Posted : 21/06/2016 2:18 am
Hi, when the performances are loaded on library, you cannot see them in data utility > waveform, you just see the size of sample/waveforms on the top of the screen.
If you import the library on user (if you need to import them, that's what i done to combine two library), after you will see the waveform list.
Posted : 21/06/2016 4:52 am
Correct. The [UTILITY] > "Contents" > "Data Utility" > "Waveforms" folder show just the Waveforms in the User area.
The Waveforms in your Library can be seen when you navigate to an AWM2 Element's "Oscillator/Tune" screen, touch the Waveform assignment area (top of the screen).
Now via the pop-in menu you can SEARCH for Waveforms: All, Preset, User, or from installed Libraries.
Posted : 23/06/2016 3:38 am
Thank you Phil, i wasn't thinking about the waveform assignement to see them.
Posted : 23/06/2016 5:01 am
Hello world. I just got unboxed the Montage6, and I am wondering what are the steps to import the Bosendorfer waveforms unto the synth. Thanks!
Posted : 23/06/2016 6:49 pm
Place the Bosendorfer.X7L file on a USB stick
Insert the drive in the TO DEVICE port
Press [UTILITY] > select "Contents" > "Load"
Using the Data Dial set "Contents Type" = Library File
Touch the box that represents your USB stick to open it and view the contents.
Touch the box "Bosendorfer.X7L"
Posted : 23/06/2016 8:01 pm
Thanks!
Posted : 27/06/2016 2:56 pm
