Synth Forum

Notifications
Clear all

Problems with midi control

7 Posts
2 Users
0 Reactions
1,832 Views
 Per
Posts: 0
New Member
Topic starter
 

Hallo...
I have some problems with my Rack XS

When i use a keyboard to control XS to change sounds, it works in voice mode, but when i use Multi mode, i cant change the whole program sound, but only the sounds in the program will change..

I cant find the problem... I have set midi to 63/68... I have switched the 1-4 sounds on so it is possible to play with 4 sounds on the same midi channel..
Does anyone know to break this problem ?

Regards

Per Jensen

 
Posted : 17/10/2019 8:30 am
Bad Mister
Posts: 12303
 

MSB/LSB 63/68 is correct PC 000-127

Can you do a test from another device...?

 
Posted : 17/10/2019 6:38 pm
 Per
Posts: 0
New Member
Topic starter
 

I have tried from a Motif XF Allso and it did not work..
In Motif XF i cant find MSB/LSB or PC where i Can change...
do you know the secret in Motif so i also can try XF ?

I have an roland Ax edge.. here i have MSB/LSB and PC.. but PC goes from 0-127 its not possible to make a 0-127
But i can only choose a number between 0-127 ?

Regards

 
Posted : 17/10/2019 7:39 pm
Bad Mister
Posts: 12303
 

You can either send it from Master Mode or simply enter it into the Motif XF’s Sequencer.

Call up a blank SONG
Select the Track corresponding to the MIDI Channel... Track 1 is selected by default.
Press [EDIT]
Press [F5] INSERT
Use the Data Dial to select “Event Type” = Program Change
Move the cursor down to set the event.

Yamaha makes MSB-LSB-PC easy ... it is a single event: xxx-yyy-zzz

At measure 001, beat 01, clock 000 set the “Bank” = 063-068
Set the “Data” = the Program Change number
Press [F6] SET to enter the event to the track.

Press the Play button to send the message

063-068-000 will recall Multi 001
063-068-001 will recall Multi 002
063-068-127 will recall Multi 128

Important
You must be in MULTI mode on the Rack XS

 
Posted : 17/10/2019 8:11 pm
 Per
Posts: 0
New Member
Topic starter
 

Thanks... I will try again ???

 
Posted : 17/10/2019 8:21 pm
 Per
Posts: 0
New Member
Topic starter
 

This is so strange...

When i make connection between XS end the motif XF then I can change the multi programs....when i remove the midi cabel from motif XF and put it in my roland, then i can change the programs in multi from my roland..

But if i change to Voice and go to multi again on the XS rack, then i cant change the program anymore but only the sound in program...

This is very wird ???

 
Posted : 17/10/2019 10:13 pm
 Per
Posts: 0
New Member
Topic starter
 

I think i solved the problem now... Midi can be a nightmare 🙁

Thanks for input 🙂

 
Posted : 18/10/2019 10:31 pm
Share:

© 2024 Yamaha Corporation of America and Yamaha Corporation. All rights reserved.    Terms of Use | Privacy Policy | Contact Us