Synth Forum

Notifications
Clear all

Apply MOXF arpeggio to external sound module?

3 Posts
2 Users
0 Reactions
2,178 Views
 Todd
Posts: 0
Eminent Member
Topic starter
 

Is there a way to apply an arpeggio stored in the MOXF to an external sound module? This is an arpeggio I wrote as a pattern and then saved the track to an arpeggio.

Thanks
Todd

 
Posted : 17/08/2019 1:19 am
Bad Mister
Posts: 12303
 

Yes. It matters not whether it is a Preset Arp or one you made, you simply must set ARP OUT = ON, and select a MIDI Channel on which you want to send it Out.

You don’t say what Mode you are in or whether you’re connected Out via 5-pin MIDI or USB to a computer or other device... we’ll let you work that out.

Press [ARP EDIT]
Select the Part you’ve assigned the Arp
Press [F6] OUT CH

Set the “OutputSwitch” = On
Set the “TransmitCh” = channel you require 1-16

 
Posted : 17/08/2019 1:47 am
 Todd
Posts: 0
Eminent Member
Topic starter
 

Sorry - didn't tell you enough.

I will be working in Song mode. I will use an external synth module as the sound generator for Track 1, talking through 5-pin MIDI. I will route the output of the external synth module to the A/D Input L&R jacks and mix with the other song tracks (2-16).

Thanks
Todd

 
Posted : 22/08/2019 1:18 am
Share:

© 2024 Yamaha Corporation of America and Yamaha Corporation. All rights reserved.    Terms of Use | Privacy Policy | Contact Us