Notifications
Clear all
MOXF Series Music Production Synthesizers
7
Posts
2
Users
0
Reactions
1,936
Views
Topic starter
Hello, I'm trying to change the default setting to a specific Voice when I power on my MOXF8. I've followed several proceedures found on the interweb and consulted with my manuals. I can change the default setting (e.g. press UTILITY, press F1, press SF6, PowerOnMode to STORE-ENTER, press STORE, Exit Utility mode, then select the Voice I want, press STORE and ENTER (at the same time). However, when I power on the MOXF8 it does go to the voice I want but it has the APR button on (which I don't want). I've tried different voices and made sure that the ARP button was not selected but still get the same result. What am I doing wrong? Thanks in advance.
Posted : 15/11/2019 8:02 pm
( I’m not near my MOXF, sorry)... but I’m certain...
You should be able to store and recall the Voice exactly as it is stored/recalled normally... that is, with or without Arp On/Off.
Posted : 15/11/2019 8:10 pm
Topic starter
Thanks for your quick reply Bad Mister. I agree, as I changed the default voice when I originally got my MOXF and I had no issue with the ARP button. But when I tried again this week to change it to another Voice I power on and the ARP button is lit up. Strange. Hopefully, we can figure this out. Am I going about the correct steps? Thanks
Posted : 15/11/2019 9:51 pm
If you were to navigate to the PowerOnMode parameter setting right now, does it show “STORE+ENTER” or something else?
Are you using anything connected to the Assignable Foot Switch jack?
If yes, what is the Foot Switch set to control?
Posted : 15/11/2019 10:18 pm
Topic starter
Solved! Thank you Bad Mister. I unplugged my FC7 from the MOXF8 and it worked. No ARP button activated. I'll try tomorrow to understand why this was an issue. Much appreciated. Dave
Posted : 15/11/2019 10:36 pm
The FC7 should only be plugged into the Assignable Foot Controller jack.
Never (ever) into the Assignable Foot Switch jack.
The FC7 has TRS connector — correct for the Foot Controller jack
The Foot Switch is expecting a pedal with a TS connector... FC4A or FC5
Posted : 16/11/2019 12:31 am
Topic starter
Interesting. Thank you again Bad Mister. Dave
Posted : 16/11/2019 6:13 pm
