Notifications
Clear all
MOXF Series Music Production Synthesizers
2
Posts
2
Users
0
Reactions
1,033
Views
Topic starter
Morning,
Apologies if this post is already answered on the Forum, first time here!
I'm trying to find a way I can change the Performance Mode using a foot controller or using an app that can send Midi messages.I can either scroll through in order, so a simple up/down would work fine, or use an app to change the song at the gig, which in turn would select the right Performance Mode. I guess this is possible, it's just a case of knowing what CC would change the Performance mode?
I'm only using Performances live, so no need to skip between Voice or Song mode. Everything is done in performance mode.
Any help, greatly appreciated!
Posted : 27/10/2017 10:49 am
If you are moving (advancing) between Performances, you can use a simple momentary Foot Switch (FC4/5 type) plugged into the Assignable FOOT SWITCH jack
Press [UTILITY]
Press [F4] CTL ASN (Controller Assign)
Press [SF2] FT SW
Set FS = 98[PC INC] Program Change Increment
Press [STORE] to write this to your instrument's System settings.
If you need to do it via MIDI, you can send the appropriate MSB/LSB (Bank Select) and PC (Program Change)
MSB = 63, LSB = 64, PC 0-127 (Performance 1-128) USER 1
MSB = 63, LSB = 65, PC 0-127 Performance 1-128) USER 2
Posted : 27/10/2017 3:42 pm
