Notifications
Clear all
Topic starter
I have problem with my AN1X.
When I played it one time sound is rich and nice and while after sound is not that reach.
Is there a problem with layers?
When layer pan is off sound is not rich.
When layer pan is set to alternate sound is rich.
But there is a problem
One time is rich and one time not.
How to fix this?
How to set this to not change.
Like every time i press the key sound will be the same?
And second additional thing.
When I pressed key on the synth and in the same time on the software editor sound is richer too but in other way.
What is happening here?
When I pressed key on synth and key in the software?
How to get the best richness of both keys pressed on alternate every time I pressed key to be the same?
or at least how to get the best richness of alternate every time I pressed key to be the same?
I mean how to get this sound if I press one key and every time this sound be the same?
Example software editor settings screenshot
Audio in the attachments
Posted : 10/01/2022 3:40 am
Hi Albania,
Good to see the old AN1x Editor!
It sounds like what you are describing is a MIDI Routing issue. I suggest the very first thing to try is to disconnect the MIDI connection — just play the AN1x alone, connected to the sound system only. If full sound returns, you will *know* that the issue concerns your MIDI connection.
One cause of thin sound is Routing the same signal through the system twice simultaneously, you’ll get a kind of cancellation.
Check your MIDI Routing and how audio is routed through your system. if you are Routing signal to a computer via an audio interface, you may have different options for monitoring.
Another cause of thin sound deals with the setup of your sound system. Summing a stereo signal improperly to mono, can cause a thin sound due to phase cancellation of the audio signal.
Posted : 10/01/2022 3:50 am
Topic starter
Hi Albania,
Good to see the old AN1x Editor!It sounds like what you are describing is a MIDI Routing issue. I suggest the very first thing to try is to disconnect the MIDI connection — just play the AN1x alone, connected to the sound system only. If full sound returns, you will *know* that the issue concerns your MIDI connection.
One cause of thin sound is Routing the same signal through the system twice simultaneously, you’ll get a kind of cancellation.
Check your MIDI Routing and how audio is routed through your system. if you are Routing signal to a computer via an audio interface, you may have different options for monitoring.Another cause of thin sound deals with the setup of your sound system. Summing a stereo signal improperly to mono, can cause a thin sound due to phase cancellation of the audio signal.
Thanks for answer.
I'm using Roland Um-One cable for Midi - USB connection.
I checked but it's the same.
Only on AN1X sound is thick and in alternate layer pan mode is more rich but every key press sound jumping left - center - right.
When I plug-in into usb situation is the same but additionaly I can press key in software and sound is even more rich.
When I set Midi-In to UM-One I can play only on AN1X
When I set Midi-In & Midi-Out to UM-One I can additionaly play in software and when I press key both in Software and AN1X sound is different, more rich than only on AN1X without USB connection and soft.
Posted : 10/01/2022 9:13 pm
