Synth Forum

Notifications
Clear all

Controlling a Yamaha DX27 with a midi controller

6 Posts
4 Users
0 Reactions
4,546 Views
 Eric
Posts: 0
New Member
Topic starter
 

Hello, please excuse my ignorance I am new to hardware synths. I recently obtained a DX27 and have been having a blast programming voices. However, I'd really like to use my midi controller (which is a akai mpk 49) to control the synth in order to use the arp from the controller and to play phrases so i can edit parameters on the synths while the keys are played by the controller. I really don't know if this is possible as ive never used midi before. If anybody knows how to get the DX27 to work with a controller I would greatly appreciate any tips.

 
Posted : 18/10/2016 11:55 pm
Bad Mister
Posts: 12303
 

There is nothing you need to do on the DX27 beyond plug a MIDI cable into the MIDI IN jack. The DX27 is set to receive MIDI when you power it On. You can set a MIDI Receive Channel (default is 1).
All settings you need to make are on your controller device.

 
Posted : 19/10/2016 2:29 am
 Jack
Posts: 0
New Member
 

any idea how to control voice parameters with a midi controller? can you program a uc-33 for instance and then use the CC commands to control things like oscillator frequency ratio, the envelope generator, etc? Using the interface in the dx27 is a nightmare so would be amazing if i could just assign everything to control knobs

 
Posted : 11/03/2018 5:11 pm
Bad Mister
Posts: 12303
 

Hi Jack,
What’s a “uc-33”?
And no, the DX27 is circa “last century” FM... That kind of real-time parameter control just didn’t exist back then within the FM engine.

 
Posted : 11/03/2018 10:10 pm
Martin
Posts: 0
Eminent Member
 

What’s a “uc-33”?

Here is an old review: Sound on Sound jan.2004

And no, the DX27 is circa “last century” FM... That kind of real-time parameter control just didn’t exist back then within the FM engine.

Well, the DX27 does (more or less) support real-time parameter control using SysEx. But I think you could not hear changes while holding notes if I remember correctly. And to make things worse, the UC-33 review states:

However, it's not possible to program your own SyEx strings for detailed editing of synths

BTW: You can do realtime control using CC messages on the Reface DX

 
Posted : 08/04/2018 5:05 pm
Bad Mister
Posts: 12303
 

BTW: You can do realtime control using CC messages on the Reface DX

Yes refaceDX is circa “this century” FM!

 
Posted : 08/04/2018 9:04 pm
Share:

© 2024 Yamaha Corporation of America and Yamaha Corporation. All rights reserved.    Terms of Use | Privacy Policy | Contact Us