Active Member
Joined: Nov 18, 2014
Topics: 3 / Replies: 42
Reply
Assign "Layer on/off" to footswitch??

A continuous controller like the FC7 offers the most control, of course. But there is a way to use a footswitch with an expression pedal input jack o...

9 years ago
Forum
Reply
CP4 audio interference with MIDI over USB

Yes, most likely ground loop. This won't happen with DIN MIDI because MIDI (thank goodness!) is required by the specification to be optically isolate...

9 years ago
Forum
Reply
Using Balanced XLR Left Only for Mono Mix

... AND, that's the good news. In my experience, just one side nearly always sounds better than summed to mono. It depends on how the sounds use s...

9 years ago
Forum
Reply
Strange sounds while playing Rhodes sounds - kind of artefacts

You call that high frequency? Anyway, as a Rhodes owner since 1978, I can tell you that this is how a Rhodes sounds when you let up a key. (If you...

9 years ago
Forum
Reply
Another question on mono/stereo & the CP4

You're right that it's not that problematic. When adjusting the reverb for your mono patch, just monitor it the same way you'll be using it live (tha...

9 years ago
Forum
Reply
Another question on mono/stereo & the CP4

I'm with Bad Mister. I always run stereo for my monitor. If I send to FOH and they only have mono, then I send just the right side. [I find that the...

9 years ago
Forum
Reply
Using balanced and unbalanced outputs at the same time.

Yeah, I bet it's phantom power. I forgot to mention this as yet another thing a DI box handles, so I'll edit my post and add it. I doubt it's impe...

9 years ago
Forum
Reply
Using balanced and unbalanced outputs at the same time.

Both outputs work at the same time on my CP4. For one band rehearsal setup, I send XLR outputs to the band mixer, and the 1/4" outputs to my small mo...

9 years ago
Forum
Reply
Setting up CP4 as lower manual for Hammond XK1c

By default, MIDI Channel 1 is the main channel for the XK (controlling the whole instrument, and notes for the upper manual). Channel 2 is for the lo...

9 years ago
Forum
Reply
Playing a part with an external MIDI master

Why isn't the CP4 compatible with iPad Camera Connection Kit? That kit provides DIN MIDI in/out connectors for the iPad or iPhone. In what way is th...

9 years ago
Forum
Reply
Setting up CP4 as lower manual for Hammond XK1c

Bad Mister: We must be miscommunicating, because your last post doesn't contain anything I don't know, and it doesn't change my suggestion. The rea...

9 years ago
Forum
Reply
Setting up CP4 as lower manual for Hammond XK1c

I suggest setting the XK's main (upper manual / control) channel to something other than 1, 2, or 3. This way, any CP4 performance will not trigger t...

9 years ago
Forum
Reply
Setting up CP4 as lower manual for Hammond XK1c

Regarding pedals, I believe Jim means he wants to use two zones on the CP4, with the lower zone feeding the XK's MIDI channel for pedals, and the uppe...

9 years ago
Forum
Reply
A closer look at the VCM pedal and touch wah effects

Great article, thanks! The CP4's ability to have two expression pedals is impressive, and the CP40's ability to have one is creditable. I have yet...

9 years ago
Forum
Topic
Forum
Replies: 1
Views: 5707
Page 1 / 3

© 2024 Yamaha Corporation of America and Yamaha Corporation. All rights reserved.    Terms of Use | Privacy Policy | Contact Us