There is something that I have not commented that I fear is important in this whole story. The distance between the modx and the saffire will be great...
Fantastic Bad Mister, everything was clear! Midi out saffire midi in modx! Thank you!
Great! Thanks Bad Mister! There are some things I don't know how to do: How do I set the modx as a Logic clock slave? On the other hand, I can't find ...
Thanks Bad Mister. For now, just by having turned on Master Zone, I have not had problems with kronos FX. I will watch and I will use your last post a...
Bad Mister, thanks for your response. The truth is that Master Zone is Off. Should I put it on On? This can cause other things to stop working correct...
Cool! It worked perfectly! Thank you very much Jason!
Well, it seems that I found the solution. It seems that at some point, accidentally or unconsciously, I had to touch knob one and I had to activate it...
Well, although I have not found the solution, I have found a way to avoid the problem. I do not know if commenting on it, can give clues so that one o...
Finally the solution has been to use the conventional foot switch with a "Y" cable so that with the same pedal active both keyboards. Thanks for all y...
Yes, Jason, all the parameters were correct. I started from scratch and everything worked. It has not been necessary to check with the modulation whee...
It works now. Now it is only necessary to adjust the parameters a bit so that the effect is exact. I think the problem was the following. I had don...
It is enormously frustrating to see the help in the palm of your hand and not even know how to take advantage of it. I think I have done everything as...
Thank you for your answers! Jason, I understand what you say about the "volume" or "level" parameter, but I think it's not really that effect on th...
I've tried it, and I'm not convinced by the piano alone without octave. I will stay with the desire to hear that pattern in a "natural" octave. Nothin...
6) An optional change - on PART 2 (the octave shift piano) I chose to change ARP1 (which was FA_Bomba_C) to “Mute 4/4”. The reason for this is that t...