Hello,
I am using MODX with an external organ expander that is controlled thanks to the zone definition in the first part of my performance. But I have other performances where the expander is not used, and all my parts only use internal sounds. Still, data is sent to the MIDI OUT socket, and my expander plays the notes that are supposed to be played only by the internal parts.
How can I make sure that no data is sent via the MIDI Out socket unless I choose to do so by defining a zone?
Thanks,
Pierre
I found the solution on the Moessieurs site : a zone needs also to be defined for the parts of the performances not using the external expander, and the transmit channel has to be set to Off.
Didn't see this duplicate thread before answering the first one.
Current Yamaha Synthesizers: Montage Classic 7, Motif XF6, S90XS, MO6, EX5R
Bonjour Pierre,
I'd like to have only ONE MODX+ Performance to control a Nord, Stage 3 76 and all the other Performances to only play internally. This performance would be the only one accessed to play the Ext.(Nord Stage3) for convenience
Have been reaching a road block.....
To globally prevent all other Performances from sending Midi out, (play internal only) in Utility Midi I/O ........Zone Master apparently needs to be "off' to do this
When you then go to Program edit (for the one new program I'll call "PlayEXternal)" to try to set the Midi out info, THE ZONE TABS DISAPPEAR. I'm not sure if there is a work around here, without having to turn Zone Master ON and OFF depending if I want to play the external keyboard.
Ideas?
Hope I'm not intruding. Merci!
Hi, suit that link and use my google translator icon to translate this page, my website is in French, it's a Bad Mister (Phil Clendennin) tips that i have translate
https://www.moessieurs.com/Montage/midi_out_off_montage.html
Hope that's help