Notifications
Clear all
Topic starter
Hello! I would like to use a sustainpedal to control or switch between fast/slow with the rotary effect of organ sounds on my MODX8.
I think it is important to check the range of the effect like on the modulation wheel.
I have already connected an FC7 volume pedal to footswitch 1 and a sustain pedal to sustain, so that would be the 3rd pedal. LG Fritz
Posted : 01/04/2022 10:58 am
Although I have an ideascale request to enhance the capabilities of the sustain pedal - at the moment MODX/Montage has a very narrow sustain pedal implementation. You cannot use sustain for anything other than sustain-related currently.
The foot switch could be used but would need to be a latching (not momentary) one unless you are OK with leaving your foot down for one speed and lifting for another.
I have already connected an FC7 volume pedal to footswitch 1
I don't understand connecting an FC7 to footswitch (FS). This should be connected to one of the footcontroller (FC) port.
Posted : 01/04/2022 3:24 pm
Topic starter
[quotePost id=115815]See Bad Mister's replies about how to program a pedal to control speed
https://www.yamahasynth.com/forum/reprogram-leslie-from-mod-wheel-to-foot-switch#reply-8750
https://www.yamahasynth.com/forum/reprogram-leslie-from-mod-wheel-to-foot-switch#reply-9592
Hope those help.
[/quotePost] THANK I TRY!!!!
Posted : 01/04/2022 3:48 pm
Topic starter
There is so much Information in the links
Has anyone a step by step instruction
Kindly regards and thank you!!! Best wishes from Austria
Posted : 01/04/2022 4:03 pm
There's two options in the single reply #8766 from Bad Mister. I'm not going to cut and paste that here. Both options show step-by-step with option 1 having very little steps.
Posted : 01/04/2022 4:10 pm
