Notifications
Clear all
Topic starter
Hi all,
My chain is simple:
Band helper on an android tablet connected to the modx7 via usb cable.
Band helper send the info as seen on the it's internal monitor but the modx do not respond.
My questions are:
1. What are all the parameters on midi i/o and advanced pages?
2. There are two different msb lsb pc numbers on forum: 62 00 00 or copying thr number from a performance properties. Which should I use?
3. I read the manuals but still don't get what's between multi and singel Modes.
Please help. This been going on for a week.
Posted : 03/05/2023 4:42 am
2. There are two different msb lsb pc numbers on forum: 62 00 00 or copying thr number from a performance properties. Which should I use?
Use the info from the property display but decrease the PC value shown by 1. So if the property page shows 1 for PC you should use 0. If it shows 37 you should use 36.
Each performance is represented by only ONE combination of MSB, LSB and PC.
MSB -> 62 is used if you want to reference a performance from a LIVE SET page
MSB -> 63 is used for single part performances
MSB -> 64 is used for multi-part performances
Posted : 03/05/2023 3:16 pm
I have no doubts about proper setup and still I also cannot get Band Helper to send MSB/LSB/PC although Band Helper's MIDI monitor is claiming sending the right hex values.
Posted : 03/05/2023 3:49 pm
Spam related Bump.
Posted : 04/05/2023 8:49 pm
