Hello!

I once asked a question about the connection between Access Virus TI and MODX MIDI, but I was not successful. Bad Mister described in detail what he had to do, but the thing was not successful. I wrote earlier that I want to control the Virus TI Synthesizer with MODX as the main keyboard. I set the Zone Master in the Utility menu, then on the performance page I also put all the MIDI channels in the Zone and set a separate MIDI channel for each sound. And I set the Access Virus TI to Mult mode, i.e. multitimbral , and created a layer of 4 tones. These 4 tones were set in the MODX performance menu for 4 different channels of the performance. All receiver MIDI channels are set. MIDI Channel 1, MIDI Channel 2, MIDI Channel 3, MIDI Channel 4, etc. I also saw 2 videos of this on YouTube, I did everything exactly, yet it doesn’t work. The voice of MODX is from the Virus TI level, but the voice of Virus TI is not from MODX. This Zone Master setting I thought would work, but I am the same as before. From Virus TI MIDI Out, MODX connects to MIDI In with a MIDI cable. The connection is audible because Virus TI also sounds MODX sound. Why can't MODX use Virus TI as the main keyboard? I also tried these videos, but without success. That's exactly what I did. I hope you can understand what I wrote because I used Google Translate.