Notifications
Clear all
Topic starter
Dear all,
I'm currently working on a set for a project.
The musical director send me some examples to use for preparing.
One of the examples is attached to this post. I think i recognize the arpeggio and sound from my Montage or Motif XS but cannot find it.
Does someone recognize this?
Link, because attechment didn't work: https://drive.google.com/file/d/1k5aRhzp8SPPVAKqi3GIAzfNGwFxj47QJ/view?usp=sharing
Thanks in advance!
André
Posted : 26/01/2022 8:29 pm
Not exact, but MA_4Z_HybVel1 sounds close enough to me.
MA_4Z_4Zone1A might work too (more bass)
There's a lot to go through though that would probably work.
Posted : 26/01/2022 11:41 pm
My advice...
start learning how to create your own. Assumes you can "play" the Arp you want to a Click track. Look up User Arps and Pattern Sequencer in the Supplementary Manual, and learn Arpeggio control from the Reference Manual.
Learning curve is pretty steep, and sometimes frustrating.
It took me a good two weeks off work over Christmas to get to grips, but I managed to do this (see link) by the end of it (Harpsichord is a 16 Bar Arp, Piano is a 16 Bar Arp, Drums are a 1 Bar Arp... the Lead Vox is just me jamming over all the Arps).
So... it is doable.
Posted : 27/01/2022 10:36 am
Topic starter
Thanks for both of your replies!
For sure I want to learn to create arps myself, it's only a matter of available time at the moment...
I will check the suggested arps!
Posted : 31/01/2022 7:12 pm
