Notifications
Clear all
Topic starter
https://soundmondo.yamahasynth.com/voices/107214
greetings , in the .3 part of the preset, which you can access from the link above, it is seen that the note becomes 6 half-voices lower after key off. how can I control this effect that pulls the note up. how can I change the last sound that the note goes to. thanks
Posted : 10/07/2023 1:04 pm
That link doesn't work for me. Is this a preset on the Montage? Or user submitted?
Posted : 10/07/2023 6:57 pm
Topic starter
its a montage preset saved to soundmondo
Posted : 10/07/2023 7:24 pm
its a montage preset saved to soundmondo
It might be easier to test if you actually told us the name of the preset!:p
Posted : 10/07/2023 7:39 pm
Topic starter
synthlead dance bigskiidhook lead 2
ı hope its an orjınal montage sound (not a soundmondo downloded preset )
Posted : 10/07/2023 9:18 pm
synthlead dance bigskiidhook lead 2
ı hope its an orjınal montage sound (not a soundmondo downloded preset )
Good news - that is a preset 'Big SkidHook Lead 2'
Better news - PEG Release is assigned to the Ribbon Control. So just use the ribbon and see what results you get.
how can I control this effect that pulls the note up. how can I change the last sound that the note goes to. thanks
What you hear is the result of the Release of the Pitch Envelope Generator going down to -128.
If you edit the part and any element (1,4,5,6) you will see that they all use the same envelope. The Release parameter has a value of -128.
SOLO one of the elements and play a note and you will hear the effect.
Now change that elements Release value to 0 and play a note and there is no effect.
Go to Part 1 - Common - Mod / Control - Control Assign and notice that Destination 3 is
PEG Release and the 'Source' is Ribbon.
AEG Release is also controlled by the Ribbon. So it is affected at the same time.
Posted : 10/07/2023 9:34 pm
Topic starter
What you hear is the result of the Release of the Pitch Envelope Generator going down to -128.
If you edit the part and any element (1,4,5,6) you will see that they all use the same envelope. The Release parameter has a value of -128.
SOLO one of the elements and play a note and you will hear the effect.
Now change that elements Release value to 0 and play a note and there is no effect.
Go to Part 1 - Common - Mod / Control - Control Assign and notice that Destination 3 is
PEG Release and the 'Source' is Ribbon.
AEG Release is also controlled by the Ribbon. So it is affected at the same time.
Thank you Andrew , i just solved it . made -128 to -72 and carry the notes to fifth degree ( example ; E goes to B )
Posted : 11/07/2023 9:36 pm
