Synth Forum

Notifications
Clear all

Midi Output to iPhone Problem

7 Posts
2 Users
0 Reactions
1,669 Views
Posts: 0
New Member
Topic starter
 

I would like to connect my moXF6 via USB Midi with my iPhone X to get my played notes into the app "Simply Piano".
My phone and my cable shouldn't be the problem. I've did a test with an e-piano and this have worked without any problems.

So it must be a problem of my moXF6 πŸ™

I've never used the midi output. Do I have to activate the midi output?

 
Posted : 19/01/2021 4:52 pm
Bad Mister
Posts: 12303
 

You need to connect your MOXF’s β€œTO HOST” Port to your iPhone using a USB cable and a LUCA (Lightning to USB Camera Adapter) and set the MOXF to MIDI I/O = USB
Press [UTILITY]
Press [F6] MIDI
Press [SF4] OTHER
Set MIDI I/O = USB

Sorry we don’t know the App you are talking about.
What version firmware is your MOXF? Latest is V1.12

 
Posted : 19/01/2021 6:16 pm
Posts: 0
New Member
Topic starter
 

Thanks for your fast answer.

This is exactly what I've done. Cable is connected at "To Host" USB Port. I have the correct adapter. The cable + adapter is working with another keyboard.

MIDI I/O was already set to USB

Where can I check the firmware?

 
Posted : 20/01/2021 2:35 pm
Bad Mister
Posts: 12303
 

Press [UTILITY] and then press [JOB]
The firmware will be shown: β€œFirm: V* . **”

 
Posted : 20/01/2021 7:07 pm
Posts: 0
New Member
Topic starter
 

I'm using 1.01 - So I think I should update firmware and try again?

 
Posted : 21/01/2021 11:08 am
Bad Mister
Posts: 12303
 

The update fixes an issue with iPhone connectivity, so yes, absolutely

 
Posted : 21/01/2021 12:19 pm
Posts: 0
New Member
Topic starter
 

Great! The firmware update solved the problem! Thank you so much! πŸ™‚

 
Posted : 21/01/2021 9:29 pm
Share:

Β© 2024 Yamaha Corporation of America and Yamaha Corporation. All rights reserved. Β Β  Terms of UseΒ |Β Privacy PolicyΒ |Β Contact Us