How to load a Bank of 128 Voices


If you have different Voice libraries, you may want to load a Bank of 128 Voices into one of the three User Banks and then load a different Bank of 128 voices in another User Bank.Here is a step by setep of how to do that. First, to review there are different file types in […]

By Bad Mister

Tagged Under

If you have different Voice libraries, you may want to load a Bank of 128 Voices into one of the three User Banks and then load a different Bank of 128 voices in another User Bank.
Here is a step by setep of how to do that.

First, to review there are different file types in the Motif XS:

FILE TYPE = ALL (.X0A) loads everything back, as saved
FILE TYPE = ALL VOICE (.X0V) loads all three banks of USER Voices and the USER DRUM bank.
FILE > TYPE = VOICE allows you to load a single Voice from an ALL (.X0A) or from an ALL VOICE (.X0V) file type.

But did you know… With the FILE TYPE = VOICE you can load all 128 Voices from a source bank to a target bank in your internal Motif XS.

Press [FILE]
Select Load TYPE = “VOICE”
Move the cursor up by pressing the [<] LEFT cursor arrow to the DIR area and then using either the [INC/YES] or the DATA WHEEL highlight the file you want to load.
(shown below): The ALL data file “B’sKnees.X0A” is selected in the Directory

FileVoiceDir

Press [ENTER] to open that File and see a list of the Voices in it. Initially you will see a list of Voices in [USER 1] and the [USER 1] L.E.D. will be lit.
Use the front panel buttons [USER 1], [USER 2], [USER 3] or [USER DR] to select the list of 128 contained in the file.

In the example below, taken from DCP Library B’sKnees – the principal organ Voices are in USER 3… by pressing [USER 3] you can view a list of the Voices in the file.

FileVoiceDir2

Move down to the bottom of the screen by pressing the [>] RIGHT cursor arrow; then using the DATA WHEEL set the target bank location…

If loading a single Voice you target a single USR 1, USR 2, USR 3 or UDR location, 001~128; however if you want to load the entire 128 organ Voices from [USER 3] list of the B’sKnees library, highlight the number location and use the DATA WHEEL (clockwise) until you pass 128 and select “all”. Shown below:

FileVoiceDir3

This will take all 128 Voices in the File you selected and point them to the 128 locations of the internal USER Bank or 32 User Drum locations you have selected.

Rinse and repeat for the other banks as you desire…. If the Library contains RAM samples, the Motif XS will automatically take care of renumbering the Waveforms so that the Voices play properly.

Keep Reading


© 2024 Yamaha Corporation of America and Yamaha Corporation. All rights reserved.    Terms of Use | Privacy Policy | Contact Us