Manny, I don’t understand how to adjust the detune. I didn’t hear any difference in the sound through the full range of detune adjustment of the mo...

My only remaining question is whether the setting you referenced on p. 185 of the Reference Manual actually affects the pivot frequency that Manny tol...

Thanks, Bad Mister. My problem was that I didn’t know there were competing conventions. All of the MIDI note frequency charts I ran into showed C4 ...

C3 is considered middle C in Yamaha. Most non-Yamaha keyboards consider C4 as middle C (same freq as Yamaha's C3)Right you are. I just checked, and t...

Manny said the pivot frequency was ~261 Hz. I will have to check into this more tomorrow.

Montage Reference manual page 135 Center Key (Pitch Key Follow Sensitivity Center Key) "Default" is generally middle C but can be programmed to ...

Another way to do it without any of the transposing hassles is set the modulator to Fixed Freq mode, tune to approximately 87 Hz (you'll need to adjus...

Does it say that middle C is the “pivot point” anywhere in the Montage documentation? I didn’t see it anywhere in the Reference Manual. If not, I t...

Another way to do it without any of the transposing hassles is set the modulator to Fixed Freq mode, tune to approximately 87 Hz (you'll need to adjus...

I am surprised that the pitchbend value bytes are in small-endian order (LSB followed by MSB). Does anyone know why that order was chosen?

(You’ve posted in the MONTAGE forum...btw... I don’t want to risk losing any of the posts so we’ll leave it hear until we solve your issue).There is s...

That’s what I get for trying to help quickly when I was really busy with something else. Thanks for the quick correction, Jason. At least I include...

I need to generate the following ratios below 1.00: 0.40, 0.66, 0.85 So far, all I can see is a way to generate 0.50 by setting the Coarse value...