New Member
Joined: Jul 22, 2017
Topics: 0 / Replies: 15
Reply
Manny's FM-Xpert #2: "I'm Fixing a Hole Where the Timbre is Thin..."

Hans, The FS1r would be the best place to start as it has the necessary Operator Fixed Frequency mode, as well as essentially the same FIlter types...

5 years ago
Reply
5 years ago
Reply
Manny's FM-Xpert #2: "I'm Fixing a Hole Where the Timbre is Thin..."

Jason, As Michael corectly mentions, you need to make sure your modulator's envelope hasn't decayed to low / to zero, so is best to set set the fre...

5 years ago
Reply
Manny's FM-Xpert #2: "I'm Fixing a Hole Where the Timbre is Thin..."

Michael, I commened in the other thread you mentioned this, but I'll repeat here for continuity... Another way to do it without any of the trans...

5 years ago
Reply
FM-X Operator Ratios Less Than 0.5

Another way to do it without any of the transposing hassles is set the modulator to Fixed Freq mode, tune to approximately 87 Hz (you'll need to adjus...

5 years ago
Reply
Manny's FM-Xpert #2: "I'm Fixing a Hole Where the Timbre is Thin..."

Michael, re: Page 16 of Thor’s guide says I should see peaks at 1, 6, and 11. I do, but I also see peaks at 4 and 9. Why I am seeing those extra peak...

5 years ago
Reply
Manny's FM-Xpert #2: "I'm Fixing a Hole Where the Timbre is Thin..."

Darryl, re: So, working with what I've got, setting the Initial Delay 1 & 2, as well as the Feedback Level 1 & 2 on both Insert effects, helps to m...

5 years ago
Reply
DX7 with real-time conrtols, "Look Ma, no menus!"

The DX7II is reasonable for realtime control as it does have the CPU headroom for altering FM parameters via the two assignable sliders. It was a sha...

5 years ago
Reply
VL - self oscillating - physical modeling technology and compatible MIDI controllers

Daniel, You are so correct in power of the VL1 being 'extending the model' beyond the basics. During the development of it, I'd engage Toshi in di...

5 years ago
Reply
Manny's FM-Xpert #2: "I'm Fixing a Hole Where the Timbre is Thin..."

The key to successful & convincing emulative synthesis is proper idiomatic playing. Alternate i.e. non-keyboard controllers can help really help a ...

5 years ago
Reply
Manny's FM-Xpert #2: "I'm Fixing a Hole Where the Timbre is Thin..."

Hey Michael, I'm glad you found the article and video series interesting and useful. To your question, my approach to doing this was a blend of ...

5 years ago
Reply
FM-X Algorithms and the 2 Additional Operators

Daryl, I totally hear where you're coming from... a build you own algorithm would be cool, but IMHO it's one of those things you think you want but...

5 years ago
Reply
Manny's FM-Xpert #5: “Everybody’s Doin’ the Knob-O-Motion”

George, Awesome work there ! The cool thing about Montage is that there are 8 realtime knobs that can be set up to control (nearly) every aspect...

5 years ago
Reply
Manny's FM-Xpert #5: “Everybody’s Doin’ the Knob-O-Motion”

George, Awesome work there ! The cool thing about Montage is that there are 8 realtime knobs that can be set up to control (nearly) every aspect...

5 years ago
Reply
Manny's FM-Xplorations: Article 3

I'm glad you've found them useful and/or interesting. More fun stuff upcoming in later articles!

7 years ago

© 2024 Yamaha Corporation of America and Yamaha Corporation. All rights reserved.    Terms of Use | Privacy Policy | Contact Us