The + and - (e.g., CFX St+ and CFX St-) mean that the sample set has been pitch-shifted up or down a semi-tone as compared to the normal version of th...
Mercy wrote:Does someone else also have this issue, and what can I do about it? I've never had this issue, and I use an FC3 pedal all the time. ...
Thomas wrote:When loading the Master Keyboard Program, I was hitting physical buttons, i.e. "E.Piano 1" to get to another program when done. The CP4 ...
I just tested this out on my CP4 ... - Picked a particular Performance (079) and edited the Master Keyboard settings - Saved that edited Perform...
joel wrote: My question is…. Why is that when I adjust the Velocity Depth & Velocity Offset to a single voice, the edited settings affects ALL voic...
Mark wrote: I've noticed quite a significant difference between the sound quality from the keyboard's XLR and jack outputs. The XLR output is much qui...
I had exactly that problem with the middle octave on a Yamaha Clavinova. Turned out the rubber contact strip had to be replaced.
Any news on the matter of Quick Reset changing VelCurve in Utility settings? Has there been any firmware update on that? Abandoned issue? Thanks.
I did find a prior thread that relates to this. Here's the link for anyone who might be interested ...
Okay, no problem, maybe someone else will chime in on the question. But yes, really, the CP4 can control its own sound modules via MIDI, and people h...
The quick fix is to use the Copy function ... Edit > Job > Copy ... see Reference Manual pp. 27-28. This allows you to copy sets of Performance param...
Of course, in addition to using foot controllers to roll volume up and down on two parts (usually Main and Layer), you can also use a foot switch to t...
"For instance, if the voice in the Layer part starts as strings, how I would by pressing the FC pedal change that voice to say a pad voice and pressin...
1) Good overview of how to assign foot SWITCHES and foot CONTROLLERS to part volume, parameters, etc., is on page 6 of the CP4 Reference Manual. br ...