![Jason Jason](http://yamahasynth.com/wp-content/uploads/images/discuss_avatar/7404_b63f57880f4b7049fba7b61a307849de.png?lm=1739916080)
Last seen: Feb 18, 2025
In the past couple weeks it seems that the DATA DIAL has started acting differently than it did before. Got it. And no matter which direction ...
I don't know but your question which includes "polyphonic" suggests you're referring to the Montage M8X. In which case this is a totally new keybed w...
Just curious - what do you mean by "switch effects in utility"? I'm assuming you mean the [UTILITY] "Effects Switch" menu. What I'm wondering i...
(part 1 for reference:) Audio Rec On DAW will, after you press it, setup the outputs for each Part to a USB channel. Since Montage has 16 Parts...
Channel aftertouch on (just about) every keyboard made has a single sensor across the entire keyboard which produces the aftertouch value. This is ha...
There's no "untweaked" material unless you're building from scratch - meaning from built-in samples with no Performance data at all. If you cons...
Since I don't have experience with an M - I'm going to answer as the Montage Classic works and suggest that some of this is likely similar. Are ...
The lack of resolution for user curves limited my use. There were only 8 different inflection points in a user curve and ideally I wanted to be able...
To globally prevent all other Performances from sending Midi out, (play internal only) in Utility Midi I/O ........Zone Master apparently needs to be...
Variation and Reverb effects can be applied in varying depths for each Part. They are set as two different effects that can be shared among all of th...
First, there's no dedicated search that just lists "Parts". In the previous Motif line, all Performances were made up of Voices and a Voice was a mor...
I'm guessing the audio driver is going to be for the Orion Studio SC which I take it otherwise works fine using low buffer sizes (translating to lower...
Superknob is recorded so when you play that back, the connected assignable knobs follow as they should. If you manually spin assignable knobs they w...
I can't address the beta test question other than to say it's rare to know anything definitive is coming until it's here -- so even the pre-launch ann...