(Minimally) I'm asking in your dump of this performance what the data return is for those addresses. 0x10/0x00/0x01/0x00 and 0x11/0x00/0x01/0x00 ...

Is there a difference between adr1/adr2/adr3/adr4 as 0x10/0x00/0x01/0x00 and 0x11/0x00/0x01/0x00? If so, what are these values? ... In the bulk du...

You should be able to use MS direct without superknob. I chose superknob because you can see when it is holding and when it's resetting. Using MS di...

All delays have a Wet/Dry balance and these should be used to simulate on and off. Alternatively you could move the effect to variation and have th...

For on/off you need to set the assignable switch [ASSIGN 1] or [ASSIGN 2] to be latched and not momentary. If you press the Performance name then sel...

1) Replace one of the two Ins Effects (InsA or InsB) with VCM Pedal Wah for each of your organ Parts 2) Edit each VCM Pedal Wah insertion effect and ...

Answered in this thread:

That section of the thread was an alternative way that was not the suggestion to use. I just state this to not get Dogukan confused. Turning Vol/E...

First you would change the default CC of FC1 so that FC1 can be used in a more generic way. Then you would go into the Parts and setup FC1 to be the ...

You need to turn keyboard control OFF for those Parts you want to set to the Rx/Tx Channel that can be different for each Part. I would probably just...

If you're using the Montage in its standard state (not as a DAW remote including the plugin option) then I take it you would be controlling the VST wi...

You might want to just load up the crash to an AWM2 Part with a free element and limit the note range to a key on the keyboard and shift that crash so...

I understand getting spooked but there's lots of docs (including Montage classic) that have errors and are never corrected. The checksum calculation...

VSTs should have a MIDI learn such that controls (knobs 1-8, for example) can be used to adjust the VST parameters in realtime.

... and a link to the original thread back in 2018 when I created this chord hold demo: